XPS-5T, CO2, 410A Vapco HVAC Xpress Refrigerant Sealant 1.5 to 5 Ton R

Alternatively, a direct-inject dry product can convert moisture to synthetic oil to prevent reaction. Refrigerant sealant (model XPS-5T) for 1.5 to 5 ton HVAC systems. Compatible with all refrigerants except ammonia. Suitable for split systems, heat pumps, microchannel coils, packaged units, and mini splits. From a safety standpoint, it does not contain chemicals associated with permanent blindness. With CO2 direct-inject: no manifold gauges or injection hose/caulk gun needed; 12+ injections per cartridge. Seals holes in A/C condensers, evaporators, fittings, and metal line sets. If system pressure never falls below about 15 psi, air and moisture are typically absent. Ultra-concentrated epoxy that reacts with air and water at the leak site to form a seal. Direct-inject tubes include check valves to reduce accidental release if connected incorrectly or overpressured. Designed to locate and permanently seal small leaks in refrigeration circuits. When used with a CO2 direct-inject system (sold separately): no pump down of R-410A required. If the system remains charged and running for one day, the sealant will repair most leaks. After evacuation, the product does not harden inside lines and valves, allowing system servicing. Formula travels with the refrigerant gas rather than with oil, allowing it to reach leaks. If air and moisture are present, pull a deep vacuum and boil moisture out of the system.

• Direct-inject tubes include check valves to reduce accidental release if connected incorrectly or overpressured
• With CO2 direct-inject: no manifold gauges or injection hose/caulk gun needed; 12+ injections per cartridge
• After evacuation, the product does not harden inside lines and valves, allowing system servicing
• Alternatively, a direct-inject dry product can convert moisture to synthetic oil to prevent reaction
• When used with a CO2 direct-inject system (sold separately): no pump down of R-410A required