SZQ Four Side Wet Film Coating Applicator Stainless Steel Film Applicators Wet Film Width 80mm (NO/9:(250μm, 500μm, 750μm, 1000μm))

How to use: 1. Fix the sample on the platform and it cann't move when the preparer slides over. 2. Select the preparation device according to the required wet film thickness, and place it on the short side of the sample plate, close to the parallel or specified position. 3. Pour about 5 ml of the sample on the front of the preparer, hold the ends with your fingers, and let it slide at a constant speed of 150 mm/sec, then obtain the wet film of the required thickness. 4. After use, wash it with solvent and apply oil . Various specifications optional,Please choose the appropriate model according to your needs! NO/1:(5μm, 10μm, 15μm, 20μm) NO/2:(10μm, 15μm, 20μm, 25μm) NO/3:(25μm, 50μm, 75μm, 100μm) NO/4:(30μm, 60μm, 90μm, 120μm) NO/5:(50μm, 75μm, 100μm, 150μm) NO/6:(50μm, 100μm, 150μm, 200μm) NO/7:(100μm, 150μm, 200μm, 250μm) NO/8:(100μm, 200μm, 300μm, 400μm) NO/9:(250μm, 500μm, 750μm, 1000μm)

• Wet film applicator is made of high quality stainless steel, which is corrosion-resistant and more wear-resistant.
• Overall Length:100mm; Effective coating width: 80mm.Suitable for water, acid and alkaline products.
• Used to apply a specified thickness of wet film to determine the coverage, color, or preparation of samples.
• Wet film applicator has four different coating film thicknesses,with high efficiency and cost saving. It is easy to clean and maintain.
• Various specifications optional,Please choose the appropriate model according to your needs！