Sanwa Supply CR-LACAMMG2 Magnetic Camera Mount (for Flat and Curved Surfaces)

Camera mount with 4 powerful magnets on the bottom. The 3 base can be easily installed on flat or curved surfaces. The ball joint can be rotated 360 degrees to freely adjust the angle. ● Easy to install on steel racks or walls. ● Can also be attached to cameras and other devices with a 1/4" screw hole. Note: Uses very strong magnets. Also, each of the 3 base attracts with magnets. Be careful not to get pinched with your fingers. Placing the camera near the magnet may cause the camera to malfunction and the recorded image data may be destroyed. Please make sure the surface of this product is mounted close to the camera. When installing, please ensure that the clamp does not slip or slide off before using. ■Installation Method: Magnet. ■ Size: Main unit (W x D x H): 4.8 x 5.5 x 2.6 inches (123 x 1GoPro Adapter/W58.2D31H26mm ■ Weight: Main body: Approx. 8.8 oz (250 g). GoPro Adapter: Approx. 0.6 oz (18 g). ■Material: ABS resin, silicone rubber, aluminum, neodymium magnet. ■ Load Capacity: 21.3 oz (600 g). ■ Set Includes: Magnetic base, head head, GoPro adapter, hex wrench, instruction manual (English language not guaranteed).

• Camera mount with 4 powerful magnets on the bottom
• 3 base positions for easy mounting on flat or curved surfaces
• The ball joint can be rotated 360 degrees to freely adjust the angle
• Easy to install on steel racks or walls
• It can also be used to mount cameras and other devices with 1/4" screw hole. Note: Uses a very strong magnet. Also, each of the 3 base attracts with magnets. Be careful not to get pinched with your fingers. Placing the camera near the magnet may cause the camera to malfunction and the recorded image data may be destroyed. Please make sure the surface of this product is mounted close to the camera. When installing, please ensure that the clamp does not slip or slide off before using