Pipe House 1PC 220V Water Draining Defroster Heater Wire, 0.5m-10m 7x5mm -60C to 200C 20W-600W, for Refrigeration House Cold Storage Defrost Soil Electronics (Color : 5M 200W)

(1)Defrost Heater Wire for Refrigeration House Water Draining Defroster 0.5m 20WVoltage:220VSize:7mm Width x 5mm ThicknessEach meter is 40WPower:20W-400WWe have the type:0.5Meter 20W1Meter 40W1.5Meter 60W2Meter 80W2.5Meter 100W3Meter 120W4Meter 160W5Meter 200W6Meter 240W10Meter 400Wwhen you bid,choose the right powerApplication Scope:After cold air ber work for a while, fan blade will be frozen and need to be defrosted. Then water could be drained successfully. Because the drain was partly installed in cold storage, the water often freezes again in the pipe when it fs. To avoid it happening, you can install the wire in the drainage pipe, spill water out and heat at the same time.Characteristic:1 waterproof2 Double insulator3 Die-forged connector, highly scalable.4 Applicable temperature: -60 to 200degrees Celsius.Attention:1 you can put the wire in the water or in the air when it works. But the first time you use it, you may smell the smell of rubber for a little while. It will disappear soon. But we suggest you keep it away from drinking water, for the sake of your healthy.2 The working temperature is 70degrees Celsius, it won't hurt any kind of tube. It can work without temperature controller. But if you think 70degrees Celsiusis too hot, you can connect it with a temperature controller, such as temperature switch, rotary knob temperature controller.

• Size:7mm Width x 5mm Thickness;
• Each meter is 40W;
• Power:20W-400W.
• The Cable is designed to make installation simple and effective.
• It allows for easy setup by anyone with basic DIY skills.