Hot Tub Spa Jacuzzi® J Pump Union 2" Slice Valve Kit with Coupler How to Video

NOTE: This Union is found very rarely so DO NOT order this union unless you are sure.. Most likely you need a standard 2" Pump Union which measures close to this union so please look at the photos and be sure before ordering or send us photos so we can help you... You are buying a 2" Spigot X 2" Slip Slice Gate Valve Kit with a Jacuzzi J Style Pump Union with O-ring and a 2" Coupler for glueing 2" plumbing to the slice valve. The Valve recieves a 2" pipe or fitting on one side and then slips inside of a 2" fitting on the other side. It will slip inside of the pump union and glue and screw to a Jacuzzi J Pump fitting. The reason we offer the Coupler union is so you can use Purple Primer and Blue Glue to glue this kit to your old plumbing.. When you are glueing always glue the coupler to the old plumbing first and spin it until it stops.. Don't be confused we also offer a slice valve with a heater union look at where it it attached in the spa if it is attached to the pump and the plumbing is 2" and the pump wetend threads are Beveled and 3"across then this part is correct. This part the slice valve is used in hot tubs to stop the water so you could service the heater or the pump without draining the tub. For help please search for our YouTube video "The Spa Guy Parts Videos J Pump Wet End How To".

• J Pump Union Fits J Pump Unions Only See the picture with an Example of the Pump it fits..
• 2" Street Glueable Side measures 2 3/8" OD or 1 1/2" Slip Glueable Side measures 1 7/8" ID
• For the Video with information about this part search YouTube for: J Pump Union & Wet End Information How To The Spa Guy
• NOTE: This is a very Rare Pump union so if your pump does not have a beveled surface that the union screws to and it is flat this is not the correct one.. Look for a 2" Pump Union that measures almost the same as this one..
• NOTE: This Union is found very rarely so DO NOT order this union unless you are sure..