Concrete Stamp Mat, 17.9"x7.8" Stone Texture PU Mold for Stamped Concrete Patio, Driveway, Non-Slip DIY Overlay Imprint Tool, Reusable Stone Pattern Stamp, Manual Concrete Stamping Mold, Red

DescriptionIf you want your floor to look more aesthetically pleasing then this concrete stamping mold would be the ideal purchase, it is made from a sturdy PU that is impact and abrasion resistant for a long life. Its clear stone pattern adds a creative pattern to the concrete surface and adds a non-slip effect. It will provide the ideal solution for your unique indoor or outdoor decorative projects!ApplicationIt is widely used in courtyard paths, driveways, swimming pool platforms, sidewalks, parking lots, etc. for imprinting concrete. It is suitable for both walls and floors and creates beautiful textures on driveways, patios, sidewalks, interior floors, and more!Construction Process of Embossed FloorThe formwork erection, paving, vibrating, grouting, and leveling shall be completed according to the construction procedures of pavement concrete.Before the initial setting of the concrete surface, use a large magnesium alloy spatula to smooth the concrete surface.Use special magnesium alloy edge finishing plaster to finish edges and corners as required.Spread the colored reinforcement evenly on the concrete surface two times, the first time spreading 2/3 of the standard amount (6.6 lbs per square meter), and the second time spreading the remaining 1/3.Every time the color reinforcement is sprayed, the magnesium alloy trowel shall be used for leveling and polishing after the color reinforcement is wet so that the color reinforcement can completely cover the concrete surface.After the initial setting of the color strengthening material, when the surface is dry and hasn't obvious moisture, evenly sprinkle the coating powder on the surface, and the standard dosage per square meter is 0.33 lbs.Press the die alternately and progressively. The die shall be formed once to avoid repeated stamping.Brush the floor surface evenly three days after the completion of the die. A small amount of detergent can be added during cleaning. Cut the expansion joint in time before cleaning.After the floor surface is completely dry, it must be sprayed with color art floor protective agent, the standard dosage is 0.33lbs per square meter. The protective agent can spray with a roller brush or spray barrel.SpecificationsMaterial: PUTexture Style: Stone TextureColor: RedAssembly Required: NoNumber of Pieces: 1Operation Mode: ManualProduct Size: 45*20cm/17.9*7.8inchPackage Size: 45.5*20*3cm/18*7.8*1inchNet Weight: 1.5kg/3.3lbPackage Included1* Concrete Stamping MoldNotesPlease allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.

• 🟧 【Easy DIY Setup】 Ready for immediate use with notched alignment, this stamp mat enables seamless concrete stamping—saving time and effort for hassle-free landscaping projects.
• 🟧【Quick Large-Area Coverage】 The 17.9"x7.8" size allows efficient concrete stamping per press, speeding up your ground transformation with fewer repeats for faster completion.
• 🟧【Realistic Stone Texture】 Crafted with a smooth inner surface, it produces clear, 3D patterns that enhance outdoor aesthetics by mimicking natural stone on concrete surfaces.
• 🟧【Durable PU Build】 Made of flexible, waterproof polyurethane resistant to wear and tear, ensuring long-lasting performance and value for repeated landscaping use.
• 🟧 【Simple Cleanup & Portability】 Lightweight and stackable with a non-stick finish, it rinses easily and carries conveniently to any job site for low-maintenance handling.