CMT Orange Tools 906.127.11 – Strawberry For refundir HM S 8 D 12.7 x 25

Milling cutter for trimming in difficult situations we have designed a series of truly indispensable. Measures that we have made will be able to satisfy every need. You can use these cutters with Tungsten Carbide for precision work on laminates, or for a faster work to silhouette. Suggestions: These cutters are excellent for making mortice sash belt loops on the wood. With a cutter to cuts rights 13 mm (711.130.11) create a deep channel of about 5 mm on the side of the piece of wood where you want to perform the mortice loop. With a spiral drill 13 mm (517.130.31) given a hole in one end of the channel through the wood. Turn the wood upside down for the mortice. Use a cutter for trimming 12,7 mm with length of cut slightly higher to the thickness of the strip, following with the bearing of guide the layout of the channel that you have carried out on the opposite side of the wood.

• Diameter 12.7 mm
• Cut length 25.4 mm
• Total Length: 71 mm