Chimney Smoke Sucker, Chimney Fan Fireplace-Air Fan Air Fan, Chimney-Bleed-to-Air-Air-Stone Exhaust Air Fan 80w-100w,60w,6 Leaves

Product descriptionProduct weight:3.5 kgTension: 190-240 VSize: 80W*8 leaves/100W*12 leaves/60W*7 leavesProduct model: 100 watts 12 leavesProduct specifications: 22cmx22cm×18cmBase diameter: 13cm-22cmApplicable voltage: 220VColor: image colorNotice1. The household chimney uses a suction cable fan, the outer temperature should not do this above 60 degrees.Otherwise the suction fan will be damaged.Install the power cable with at least 0.5 square copper wire.2. Turn off the network switch when installing or removing to avoid an electric shock.3. The interface for the smoke extraction must be attached with waterproof insulating tape.4. The installation at the interface to the chimney must be firm and the interface must be closely integrated into the chimney in order to achieve the best effect.5. If the suction fan no longer works, care should be taken to pay attention to smoke, which causes smoke to escape.6. The smoke extraction is on the chimney.The smoke sucker must be more than 6 meters from the fire source, otherwise the suction fan is burned. The temperature of the fireplace cannot burn the isolation layer of the power cable.

• A notice !!!The operating voltage of the product is 190-230 V, and the chimney suction fan is used by leaving two cable ends for connection to the power source.
• The outlet temperature of the chimney fan should not exceed 60 degrees.Otherwise the suction fan is burned.
• It is very suitable for chimney accessories.The chimney suction fan creates suction and induces the quick smoke to prevent the smoke from not leaving the smoke out of the smoke due to the bad chimney.The smoke is not only quickly, but also quickly drained, it also has an excellent performance.
• Easy to install, very quiet, suitable for most types of fireplaces and no professional technicians are required for installation.
• Disconnect the power supply during installation or disassembly to avoid an electric shock.