Car Lift 9,000lbs 2 Post Auto Lift Floor Plate Auto Truck Hoist for Home Garage, 110V

HPDMC Car Lift 9,000lbs 2 Post Car Lift Floor Plate Auto Truck Hoist for Home Garage, 110V The machine is applicable for the lifting of various small autos and medium-sized vehicles with a total weight below 9,000 lbs (4 tons). Designed based on the international standard, meeting the demand of the garage and workshop.SpecificationCapacity: 9,000lbsVoltage: 110VPower:2.2kWMax Lifting Height74.8''Overall Height: 111.2''Overall Width: 135.8''(145.8'' with Poer Unit)Width Inside Column:112.2''Front Arm: 24.2''-45.2''Rear Arm: 35''-54.7''NOTE!!!Equipment Required for unloading: A forklift or Tractor is required from the customer for unloading the product. Nearest Terminal Pickup can be requested if the customer does not have the ability to unload.

• Specification: Capacity: 9,000lbs; Voltage: 110V; Power:2.2kW; Max Lifting Height: 74.8''; Overall Height: 111.2''; Overall Width: 135.8''(145.8'' with Power Unit); Width Inside Column:112.2''; Front Arm: 24.2''-45.2''; Rear Arm: 35''-54.7''; Rising Time: <55 sec; Descending Time: >45 sec
• Wide Application: The auto lift is applicable for the lifting of various small autos and medium-sized vehicles with a total weight below 9,000 lbs (4 tons). Designed based on the international standard, meeting the demand of the residential garage and workshop. The requirement is to have a minimum strength of 3000 PSI for concrete before the auto hoist is assembled
• Systematic Equipment: The two post automotive lifts are equipped with a manual safety locking system, powered by dual hydraulic cylinders for stable lifting and lowering. It also includes a mechanical locking system with safety latches in each column, a chain-type lifting system, and steel wire rope equalizing cables. Additionally, it features adjustable lift pads and adapters, a low-profile floor plate, and a durable powder coat finish
• Stabilize the Barycenter: Different vehicles have different center of gravity positions. When the vehicle is placed on the car lift, ensure that its center of gravity is close to the plane formed by two columns. Adjust the swing arm so that the lifting pad supports the lifting point of the vehicle
• Attention: Please note that the hydraulic valves are pre-adjusted at the factory and should not be adjusted by the user, as they will be responsible for any resulting consequences. Equipment Required for unloading: A forklift or Tractor is required from the customer for unloading the product. Nearest Terminal Pickup can be requested if the customer does not have the ability to unload