| Management number | 215321797 | Release Date | 2026/04/12 | List Price | $27.95 | Model Number | 215321797 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
The entire set includes:1 pc x compression tester,1 pc x pipe,4 threaded connectors,1 x linear pressure tube,1 x incline pressure tube,1 toolboxHow to use a car/motorcycle cylinder pressure gauge?1. Start the engine and make it run to normal operating temperature (cooling water temperature 70-90 degrees Celsius) 2. Turn off the engine, remove the stolen goods around the engine spark plugs, and remove all spark plugs. 3. Place the throttle and choke in the fully open position 4. Press the conical rubber connector of the cylinder pressure gauge into the spark plug hole of the cylinder to be tested (or screw the threaded tube connector into the spark plug hole) 5. Use the starter to drive the crankshaft to rotate for 3-5s (no less than four compression strokes), read the reading after the pointer is stable, and then press the one-way pointer to reset to zero. 6. Repeat step 5. Note that the number of measurements for each cylinder should be no less than two times, and the measurement results should be the average value of the measurements. 7. Check each cylinder in turn according to the above method.Model Number : 28961Type : Pressure Gauge
| Brand Name | IUVPTAF |
|---|---|
| Manufacturer | JIARUIQIPEIDIAN |
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form