AMT 393A-95 2" NPT Cast Iron Sewage/Trash Pump, 150psi, Silicon Carbide, Viton Seal, 5hp

AMT 393A-95 2" NPT Sewage, Maximum Temp 180 F, Self-Primes to 20 Ft, Silicon Carbide/Viton Mechanical Seal. AMT Cast Iron Sewage/Trash Pump are designed for trouble free and economical handling of solids laden liquids and slurries. Cast iron construction with two vane stainless steel self-cleaning impellers, silicon carbide mechanical seals for abrasion resistance and Buna-N O-rings and heck valves. Built-in check valve allows pump to reprime automatically in an open system without the foot valve. The solids handling capabilities of the Pump make them deally suited for a variety of industrial applications including: sewage treatment, canneries, chemical processing, wineries, tanneries, meat packing, breweries, pulp, wood hips, process water, sludge and slime, waste water, white water and other applications. These sewage/trash Pump will easily handle liquids containing sewage, stones, ticks, mud and other solids. Cast Iron Construction for Abrasive Resistance and Durability; Silicon Carbide/Viton Mechanical Seal; Built-in Buna-N Check Valve; Buna-N O-ring Casing Seal Reusable After Clean Out Maintenance; Self-Cleaning Stainless Steel Impeller Resists Clogging and Wear; Pull-from-Rear Design Permits Clean Out and Repair Without Removing Piping; Replaceable Cast Iron Volute/Wearplate Designed for Solids Handling; Motor Includes Stainless Steel Shaft or Stainless Steel Shaft Sleeve; 5 HP TEFC (Totally Enclosed, Fan Cooled), 3Phase, 230/460 VAC/60 Hz, 184JM Frame, 17/9 Full Load Amps, 3450 RPM Motor; Available (A200-90) for 184/215 JM Frames; Maximum Working Pressure 150 PSI; Seal Flush Port Provided on 5 HP and Larger; Minimum liquid requirement must be above 85%. maximum 15% solids. Failure to do so may damage pump & void warranty. NOTE:Dimensions are in inches and have a tolerance of +/-1/4". NOTE: Electric supply for ALL motors must be within +/-10% of nameplate voltage rating (e.g. 230V +/-10%= 207 to 253).

• Designed for trouble free and economical handling of solids laden liquids & slurries
• Minimum liquid requirement must be above 85%- max 15% solids; Removable Cast Iron Volute/Wearplate
• Cast Iron Construction with Stainless Steel, Self-Cleaning, Semi-Open Impeller; Self-Primes to 20 Ft
• SiC/Viton Mechanical Seal; Buna-N O-rings and check valves; 180 F Max Temp
• Easy Cleanout Design; TEFC Motor Included