3D Printing Filament Storage Dryer Box Efficiently Prevents Humidity for Consistent Prints, Large Capacity for 1KG Spools, Suitable for Various Filament Sizes and Types

1. [EFFECTIVE HUMIDITY PREVENTION] Keep your filament dry to avoid stringing, clogging, and bubbling issues during printing. 2. [SPACIOUS CAPACITY] Accommodates 0.5KG and 1KG filament spools, with transparent design for easy monitoring. 3. [INTEGRATED MONITORING] Built-in thermometer and hygrometer for real-time temperature and humidity tracking. 4. [VERSATILE COMPATIBILITY] Compatible with various filament diameters (1.75, 2.85, 3.00mm) for different setups. 5. [SMOOTH ROTATION DESIGN] Bearing roll support mechanism ensures smooth spool rotation and easy filament changes. Specification: Item Type: 3D Printing Filament Dryer Box Material: ABS Temperature and Humidity Meter Battery Specification: 2 Batteries (Batteries Not Included) Vacuum Bag Size: Approx. 30 x 34cm / 11.81 x 13.39in Drying Box Size: Approx. 254 x 127 x 237mm / 10 x 5 x 9.33in Maximum Capacity: Approx. 210 x 79mm / 8.27 x 3.11in (Dianeter x H) (thin wire with bobbin) Conductive Wire Diameter: Approx. 1.75mm / 0.07in, 2.85mm / 0.11in, 3mm / 0.12in How to Use: Installation: 1. Install the electronic hygrometer on the battery . 2. Put in desiccant . 3. Place the fixing tube into the filament hole. 4. Support the sides of the desiccant box with your hands while supporting and placing the filament (align the slots for fixing). 5. Close the lid and pull out the filament (pay attention to the direction of the filament). PackageList: 1 x Drying Box 2 Pack x 50g Drying Agent 1 x Electronic Temperature and Humidity Meter (Without Battery) 1 x 5cm Discharge Pipe 5 x Plastic Bearings 2 x Material Axes 1 x Pneumatic Joint 1 x M6 Nut 2 x Spare Rubber Plugs

• [EFFECTIVE HUMIDITY PREVENTION] Keep your filament dry to avoid stringing, clogging, and bubbling issues during printing.
• [SPACIOUS CAPACITY] Accommodates 0.5KG and 1KG filament spools, with transparent design for easy monitoring.
• [INTEGRATED MONITORING] Built-in thermometer and hygrometer for real-time temperature and humidity tracking.
• [VERSATILE COMPATIBILITY] Compatible with various filament diameters (1.75, 2.85, 3.00mm) for different setups.
• [SMOOTH ROTATION DESIGN] Bearing roll support mechanism ensures smooth spool rotation and easy filament changes.